Er. Kunal N Darade Secretary
Engineering College
Dr.Gajanan K.Kharate Principal
Engineering College

Research

Information of Research Publications of Teaching Staff (Mechanical Dept.) in Journals and Conferences:

Journals

Santosh D Katkade, Prof J H Bhangale and Prof D D Palande, “Experimental Investigation of Spiral Fin Tube Heat Exchanger with Different Fin Thickness”, International Journal of Research in Advent Technology, Vol.3, No.1, pp 129-131. ISSN: 2321-9637, January 2015.

(Impact factor: 1.473 )

(Available on http://www.ijrat.org/downloads/jan-2015/paper%20id-31201544.pdf)

 

Prof.S.S.Bachhav and Prof.H.A.Chavan, “Comparative Performance Evaluation of Dry Turning, Wet Turning MQL Turning”,IJAEGT Vol-03, Issue-02, pp-319-324. ISSN No: 2309-4893. February 2015.

(Impact factor: 1.0 )

(Available on http://ijaegt.com/wp-content/uploads/2014/12/IJAEGT-409295-pp-319-324-updated-24-dec.pdf)

 

Prof.S.S.Bachhav and Prof.H.A.Chavan, “Implementing Taguchi Optimization Method In Turning”, IJCR Vol. 7, Issue, 01, pp.11486-11491, January, 2015, pp-319-324. ISSN: 0975-833X, January 2015.

(Impact factor: 3.845)

(Available on http: //www.journalcra.com/archive/201501)

 

D.P.Patil, J.H.Bhangale and K.S.Deshmukh, “Experimental Analysis of Refrigeration system using Microchannel condenser & Round Tube condenser”, International Journal of Innovative Research in Advanced Engineering , Volume 1 Issue 5 ,pp-192-198. ISSN: 2349-2163, June 2014.

(Impact factor: 1.311 )

(Available on http://www.ijirae.com/images/downloads/vol1issue5/JNME10090(38).pdf)

 

D.P.Patil, J.H.Bhangale and K.S.Deshmukh, “Review paper on refrigeration system using microchannel condenser”, International Research Journal of Mechanical Engineering , Volume 1 Issue 1, pp- 1-4. ISSN: Applied, December-2014.

(Impact factor: 3.221 )

(Available on http://irjme.com/volumes/vol1/issue1/04.IRJME10083.pdf)

 

Kiran S. Bhusal and J. H. Bhangale “Study and Investigation of Heat Transfer Enhancement of Car Radiator by using Nano Fluid – Review”, International Journal of Engineering Research & Technology (IJERT) Vol. 3 – Issue, pp-178-185, , ISSN:2278-0181, 10 October – 2014.

(Impact factor: 1.76 )

(Available on http://www.ijert.org)

 

S D Katkade, J H Bhangale and D D Palande “A Review: Fin and Tube Heat Exchanger Performance with different Fin Pattern”, International Journal Of Engineering Sciences & Research Technology, Vol.3 (12) , pp 165-168, ISSN: 2277-9655, December- 2014.

(Impact factor: 3.449 )

(Available on http: // www.ijesrt.com)

 

Prof. A.A.Walunj and Prof. D. D. Palande, “Review of natural convective Heat transfer from rectangular vertical plate fins,” IIJME , Volume 2, Issue 6, June 2014.

(Impact factor: 3.0 )

(Available on http:// http://ipasj.org/IIJME/Volume2Issue6/IIJME-2014-06-12-036.pdf)

 

Prof. N.C.Ghuge and Mr.K.R.Sonawane, “Hydrogen Fuel IC Engine an overview,” IJIFR, ISSN2347-1697, pp-580-586 vol-02, issue-03 Nov 2014.

(Impact factor: 1.012 )

 

Prof. A.A.Walunj, Prof.D.D.Palande and Prof. V.S.Daund, “Review of performance of rectangular fins under natural convection at different orientation of heat sink”. IJIAS, ISSN 2028-9324 Vol.6No., pp.232-238, 02 June2014.

(Impact factor: 3.5 )

(Available on http://www.issr-journals.org/xplore/ijias/IJIAS-14-128-02.pdf )

 

Prof.D.P.Patil, “Review paper on Refrigeration system using micro channel condenser”. IJATES Volume No.02, Issue No. 06, pp-120-125 ISSN (online): 2348 –7550 06 June 2014.

(Impact factor: 1.012 )

(Available on http://ijates.com/images/short_pdf/1402776063_P120-125.pdf)

 

Mr.Deepak Patil , Prof. Bhangale J.H. and Prof. Palande D.D, “Comparative Analysis of Various Condenser in Vapour Compression Refrigeration System”. ISSN: 2277-9655 IJERSET Sept. 2014.

(Impact factor: 3.449 )

(Available onhttp://www.ijesrt.com/issues%20pdf%20file/Archives-2014/September-2014/73.pdf )

 

Prof. P.S.Desale and Prof. N.C.Ghuge, “Enhancement of Heat transfer using wire coil inserts with chord ribs,” IJATES,Volume No.02, Issue No. 07, July 2014.

(Impact factor: 1.012)

(Available on http:// http://ijates.com/images/short_pdf/1404386323_P34-43.pdf)

 

Prof.S.B.Thakare, “Free Vibration Analysis of circular plates with holes and cutouts” IOSR 2013. e-ISSN: 2278-1684,p-ISSN: 2320-334X, PP 46-54,Volume 8, Issue 2(Jul. -Aug. 2013),

(Impact factor: 1.485)

(Available on http://www.iosrjournals.org/iosr-jmce/papers/vol8- issue2/F0824654.pdf?id=5817)

 

Prof.J.H.Bhangale, “Parametric studies in automobile manufacturing industry using cell focused plant layout simulation approach” ESJ, London European Scientific Journal March 2013 edition vol.9,No.9 ISSN: 1857 –7881 (Print) e -ISSN 1857-7431 2013.

(Impact factor: 0.74 )

(Available on http://eujournal.org/index.php/esj/article/viewFile/923/972)

 

Prof.A.A.Walunj, Prof.V.S.Daund and Prof. D.D.Palande, “Parametric analysis of plate fins heat sink over heat transfer”,IJRAT. E-ISSN: 2321–9637 Volume 1, Issue 4, November 2013.

(Impact factor: 1.473)

(Available on http://www.ijrat.org/downloads/nov-2013/paper%20id-14201334.pdf )

 

Prof.Y.K.Mogal, “Multi objective optimization design of Worm & Worm gear assembly using genetic Algorithm,” Mula’s Education society’s SIOMS Tathawade, Pune Bonfring International Journal of Man Machine Interface, Vol.3, No.1, March 2013 DOI: 10.9756/BIJMMI.4403 2013.

(Impact factor: 0.95 )

(Available on http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.403.4151&rep=rep1&type=pdf)

 

Mr.Lokesh G. Kamde and Prof.U.N.Gujar, “Vibration Analysis of Tooth Failure in Gear Box by Condition Monitoring Technique”, International Journal of Contemporary Research in Management, Engineering and Health Sciences, at Sahyadri Institute of Management Studies, Tal-Mulshi, Pune, IJCRMEHS, Volume No.001, Issue No. 001, Page No.147-156, ISSN:2320-1185, Reference No. 51, February 2013.

(Impact factor: 1.251 )

 

S D Katkade; J H Bhangale; D D Palande, “Review: Fin and Tube Heat Exchanger Performance with different Fin Pattern”, International Journal of Engineering Sciences & Research Technology , Vol-3, No-12, PP: 165 – 168, ISSN: 2277-9655, Dec- 2012.

(Impact factor: 3.449 )

(Available on http://paper.researchbib.com/?action=viewList&issn=22779655&vol=3)

 

Prof. J. H. Bhangale, “Performance Issues of CMS in Automobile Industries Using Computer Simulation” IJCA, USA. Volume 52–No.5, International Journal of Computer Applications (0975 –8887) pp-31-35. August 2012.

(Impact factor: 0.715 )

(Available on http://research.ijcaonline.org/volume52/number5/pxc3881593.pdf)

 

Prof.Y.K.Mogal and Prof. D.D.Palande, “Optimization of Gears pairs Using Genetic Algorithm” IOSR, INDIA. ISSN: 2250-3021 ISBN: 2878-8719 PP 22-26, 2012.

(Impact factor: 1.485 )

(Available on http://www.iosrjen.org/Papers/NSER%272012/F0282226.pdf)

 

Prof.N.C.Ghuge & Prof.V.K.Dhatrak, “Minimum Quantity Lubrication” IOSRJEN,INDIA.

ISSN: 2250-3021 ISBN: 2878-8719 PP 55-60, 2012.

(Impact factor: 1.485)

(Available on http://www.iosrjen.org/Papers/NSER%272012/M0285560.pdf)

 

Prof.J.H.Bhangale & Prof. G.D.Katale, “Natural Frequency of Mode Shape Analysis of Circular Cutters” IOSR, ISSN: 2250-3021 ISBN: 2878-8719 PP 61-65 INDIA 2012.

(Impact factor: 1.485)

(Available on http://www.iosrjen.org/Papers/NSER%272012/N0286165.pdf )

 

Prof.Y.K.Mogal, “Application of genetic algorithm in optimal design of spur gear pair,” AVCOE. Sangamner, 2012.

(Impact factor: 0.95 )

 

Mr.L.G.Kamde and Prof.U.N.Gujar, “Identification of Acoustic Emission Source and Comparative Study on The Diagnosis of a Spur Gear Box”, International Journal of Advanced Research in Science, Engineering and Technology, IJARSET, Volume 01, Issue 04, Page No. 01-07 ISSN: 2278 –2567, Paper- Id: 240-121204, December 2012.

(Impact factor: 0.537 )(Available on http://www.ijarset.org/papers_Vol_1_Iss_4/Kamde_Lokesh_paper_240-121204.pdf )

 

Prof.Y.K.Mogal, ““A Multi-objective optimization approach for design of worm and worm wheel based on genetic algorithm”, Published in Bonfring International Journal of Man Machine Interface (BIJ), ISSN No. 2277- 5064, vol.3, no.1, pp. 8-12, March 2013.

(Impact factor: )

(Available on http://www.journal.bonfring.org/abstract.php?id=4&archiveid=350)

Conference

Dinesh P. Panchve1*, J. H. Bhangale2, D. D. Palande3 “Performance Analysis of Internal Combustion Engines By Magnetic Treatment On Fuel- A Review”, National Conference on, “Advanced Technology and Innovations in Mechanical Engineering” (ATIME-01:2015), 22-24 January2015.

 

Prof.N.C.Ghuge, “Waste Heat Recovery of Engine for Refrigeration”, National Conference on, “Advanced Technology and Innovations in Mechanical Engineering” (ATIME-01:2015), 22-24 January2015.

 

Prof.N.C.Ghuge, “Vegetable oil as a cutting fluid: A Review”, International Conference on Advances In Civil and Mechanical Engineering, “ACMES-2015” organized by Government College of Engineering Amravati, 23-24 December 2014.

 

Mr.L.G.Kamde and Prof.U.N.Gujar, “Automatic Load Level Control System For Commercial Vehicles”, at VVP IETS Engineering College, Rajkot, Gujarat. pp. 390-395, Paper-Id: 2054, July-December 2012.

 

Prof. J. H. Bhangale, “The Role of Cellular Manufacturing System in Indian industries to increase Productivity ” International Conference-2008 , Saurashtra University , Rajkot, Gujarat.

 

Prof. J. H. Bhangale, “ Design of Cellular Manufacturing System by a computer simulation approach ”, National Conference-2008 , Sinhgad Institute of Technology , Lonavala.

 

Prof. J. H. Bhangale, “Evolution of Cell Design and Cell formation techniques in CMS for Indian industries”, International Conference-2010 , JJM COE, Jaysingpur.

 

Prof. J. H. Bhangale, “Evolution of Nanotechnology for environment and Indian industries”, International Conference-2010 , SES COE , Navalnagar,Dhule.

Books

Nil

 

Number of faculty with ongoing projects from a) National b) International funding agencies and grand received:


Sr.

No

Name of Faculty Member

Name of Research Project Undertaken

Amount as Seed Money

Total Cost of the Project

1

Prof.N.C.Ghuge

A Study Of Performance Evaluation Of Different Vegetable Oils As Cutting Fluid Using MQL In Terms Of Cutting Force, Temperature, Tool Wear And Surface Finish In Turning

Sanctioned

Rs 180000/-

Work Completed

Ref0SD/BCUD/230/89

365000/-

 


  • Student projects

Percentage student placed for projects in organizations outside the institutions i.e. in research laboratories/industry/other agencies:

 

Nature of project

Duration year

Title of the project

Name of Funding Agency

Total grant

Total Grant Received till date

From To

 

Sanctioned

Received

Minor projects

Nil

 

 

 

 

 

Major projects

Nil

 

 

 

 

 

Interdisciplinary projects

Nil

 

 

 

 

 

Students Research project

2014-2015

Shim Setup Improvement

Bosch India Ltd Satpur Midc, Nashik.

Industry Sponsored

Nil

2014-2015

Automatic Cleaning Machine

Fortuna Industries Ambad, Nashik.

Industry Sponsored

Nil

2014-2015

Cutting/Hogging Oil Seperator

V.S.Gear Musalgaon M.I.D.C. Sinnar.

Industry Sponsored

Nil

2014-2015

Design And Manufacturing Of Equiliser Mechanism For Chemlock Spraying Machine

Locus Systems Satpur Midc, Nashik.

Industry Sponsored

Nil

2014-2015

Snagging Grinding Machine

Dhanashree Industries Ambad, Nashik.

Industry Sponsored

Nil

2014-2015

Automatic Sorting Machine (Based On Height And Colour)

Nasik Springs Pvt.Ltd Midc Ambad, Nashik.

Industry Sponsored

Nil

2014-2015

Design And Development Of Desteamer Machine

Alphatech Winery Equipments Pvt.Ltd Ambad Midc, Nashik.

Industry Sponsored

Nil

2014-2015

Design And Development Of Auto Feed System

Mangesh Industries Ambad, Nashik.

Industry Sponsored

Nil

2014-2015

Safe And Reliable Material Handling Of Pressure Vessels (Gis)

Crompton Greaves Ltd. Ambad, Nashik.

Industry Sponsored

Nil

2014-2015

Poke Yoke On Enomoto Press Machine To Avoid Job Being Stuck In Upper Die

Bajajsons Ltd Satpur, Nashik.

Industry Sponsored

Nil

2014-2015

Design And Development For Manufacturing Of Bottle Filling Machine

Alphatech Process Equipments Pvt.Ltd Ambad Midc, Nashik.

Industry Sponsored

Nil

2014-2015

"Detector Support" Change In Production System To Minimise Cost, Saving Time And Utilize Time.

Hind Tools Ambad M.I.D.C., Nashik.

Industry Sponsored

Nil

2014-2015

Electro Platting Thickness Measurement Of Engine Valve Using Comparator

Shamala Electroplaters Ambad, Nashik.

Industry Sponsored

Nil

2014-2015

Development Of Fixture And Position Of Gas Nozzle Of Spm(Co2 Gas Welding Machine)

Smp Engineers And Electrical Pvt. Ltd Nashik.

Industry Sponsored

Nil

2014-2015

Root Cause Analysis Of Deep Lining On Honning Operation

Koso Pvt. Ltd Ambad Midc, Nashik.

Industry Sponsored

Nil

 

2014-2015

Kaizen Implementation For Quality And Productivity Improvement

Jbm Group, Nashik.

Industry Sponsored

Nil

 

2014-2015

Die Design (Process Study) And To Remove Product Automatically

N.K.Engineering Works Ambad M.I.D.C., Nashik.

Industry Sponsored

Nil

 

2014-2015

Design Of Rotating Machine For Leak Testing Machine Of Automobile Differential Casing

Samarth Engg. And Design Pvt. Ltd, Nashik.

Industry Sponsored

Nil

 

2014-2015

Productivity Improvement Under The Concept Of Tpm By Using J.H.Principle

Metaforge Engineering. Pvt. Ltd, Nashik.

Industry Sponsored

Nil

 

2014-2015

Lean Manufacturing For Job Production

Atlas Cop co, Satpur, Nashik.

Industry Sponsored

Nil

 

2014-2015

Improvement In Supply Chain Performance And Effectiveness Through Lean Management (Cluster Design)

Samsonite South Asia Pvt.Ltd, Gondia,Igatpuri.

Industry Sponsored

Nil

 

2014-2015

Design And Manufacturing Of Ded Welding Machine

Samarth Engineers And Designers Pvt. Ltd , Nashik.

Industry Sponsored

Nil

 

2014-2015

Lean Production Implementation On Pneumatic Hand Held Product Assembly

Atlas Cop co, Satpur, Nashik.

Industry Sponsored

Nil

 

2014-2015

Automatic Bush Fitting On Lower Control Arm

Sharda Motor Industries Ltd. Satpur, Nashik.

Industry Sponsored

Nil

 

2014-2015

Automation In Collet Clamping

Indian Tools Manufacturers, Nashik.

Industry Sponsored

Nil

 

2014-2015

Cycle Time Reduction On Moulding Machine

Vip Industries, Satpur, Nashik.

Industry Sponsored

Nil

 

2014-2015

Mold Temp Controller

Apras Polymer Pvt Ltd, Nashik.

Industry Sponsored

Nil

 

2014-2015

Modification And Enhancement Of Hydraulic Stacker

Swastik Metal Works Pvt Ltd, Nashik.

Industry Sponsored

Nil